Zoom In

Designed with simplicity of install in mind the BSH Bulletproof PCV Revamp kit takes care of the commonly occurring PCV issues in tuned 2.0T applications. Manufactured here in the USA, the CNC machined BSH Bulletproof PCV Revamp fixes the major problems with the 2.0T PCV system once and for all!

The prone to failure factory PCV system has long plagued this engine with poor mpg, rough idle, boost loss, and the dreaded oil spewing from the oil cap. The BSH Bulletproof PCV revamp ensures these issues will never affect your engine again by converting the system to a vacuum only based system. PCV function is properly retained and no emissions functions are tampered with by using this modification.


This Product Fits:
2.0TFSI
VW MKV06-08.5 GTI, GLI, Jetta, Passat, EOS
Audi A3, S3, A4, TT, TTS

Kit Includes:
- Billet Valve Cover Plate
- Billet PCV Adapter
- Billet Manifold Cap
- O-Rings
- Retaining Hardware

Zoom In

Take your PCV fix one step farther with the addition of a budget friendly BSH Street Catch Can. Our program began with the PCV revamp which solved the issue of failing factory check valves and has since evolved into complete PCV management. By adding our catch can system to your 2.0T FSI you are not only implementing a 100% PCV fix, you are also protecting your stock or tuned motor from the drawbacks of allowing blowby gasses to enter your combustion chamber. As the FSI engine is both high compression and turbocharged, allowing volatile oil vapor access will reduce power across the rev range by making the engine substantially more prone to pre-ignition/detonation. Keep your timing up and a smile on your face by getting those gasses out of your engine!

This Product Fits:
2.0TFSI
VW MKV06-08.5 GTI, GLI, Jetta, Passat, EOS
Audi A3, S3, A4, TT, TTS

Kit Includes:
- BSH Street Catch Can
- BSH Billet Valve Cover Plate
- BSH Billet PCV Adapter
- BSH Billet Manifold Cap
- BSH Billet Valve Cover Fittings
- Laser Cut Catch Can Bracket
- Integrated O-Ring Sealed Drain
- Oil and Heat Resistant O-Rings
- Retaining Hardware
- Push Lock Hose

Zoom In

Take your PCV fix one step farther with the addition of a high capacity BSH Competition Catch Can. Our program began with the PCV revamp which solved the issue of failing factory check valves and has since evolved into complete PCV management. By adding our catch can system to your 2.0T FSI you are not only implementing a 100% PCV fix, you are also protecting your stock or tuned motor from the drawbacks of allowing blowby gasses to enter your combustion chamber. As the FSI engine is both high compression and turbocharged, allowing volatile oil vapor access will reduce power across the rev range by making the engine substantially more prone to pre-ignition/detonation. Keep your timing up and a smile on your face by getting those gasses out of your engine!

This Product Fits:
2.0TFSI
VW MKV06-08.5 GTI, GLI, Jetta, Passat, EOS
Audi A3, S3, A4, TT, TTS

Kit Includes:
- BSH Street Catch Can
- BSH Billet Valve Cover Plate
- BSH Billet PCV Adapter
- BSH Billet Manifold Cap
- BSH Billet Valve Cover Fittings
- Laser Cut Catch Can Bracket
- Integrated O-Ring Sealed Drain
- Oil and Heat Resistant O-Rings
- Retaining Hardware
- Push Lock Hose

Zoom In

Take your PCV fix one step farther with the addition of a Vent-to-Atmosphere BSH Race Catch Can. Our program began with the PCV revamp which solved the issue of failing factory check valves and has since evolved into complete PCV management. By adding our catch can system to your 2.0T FSI you are not only implementing a 100% PCV fix, you are also protecting your stock or tuned motor from the drawbacks of allowing blowby gasses to enter your combustion chamber. As the FSI engine is both high compression and turbocharged, allowing volatile oil vapor access will reduce power across the rev range by making the engine substantially more prone to pre-ignition/detonation. Keep your timing up and a smile on your face by getting those gasses out of your engine!

This Product Fits:
2.0TFSI
VW MKV06-08.5 GTI, GLI, Jetta, Passat, EOS
Audi A3, S3, A4, TT, TTS

Kit Includes:
- BSH Race Catch Can
- BSH Billet Valve Cover Plate
- BSH Billet PCV Adapter
- BSH Billet Manifold Cap
- BSH Billet Valve Cover Fitting
- BSH Proprietary Air Filter
- Laser Cut Catch Can Bracket
- Integrated O-Ring Sealed Drain
- Oil and Heat Resistant O-Rings
- Retaining Hardware
- Push Lock Hose

Zoom In

You cant always re-invent the wheel, but with the right manufacturing processes, you can make one a little bit more round.

BSH takes their catch cans seriously. Externally all cans are welded together to avoid the all too common leaking issues bolt together setups have. Internally better than the competition by incorporating mesh baffling to slow down oil vapors so they cool and condense inside the can instead of your charge piping/engine. All connections are made with push lock fittings and hose to limit the use of hose clamps that would otherwise clutter up the bay. Integrated drain fittings into the base of the catch can makes maintenance a breeze.

All of the BSH catch can systems are designed to be completely reversible and mate up with all factory pcv connections utilizing vehicle specific billet connectors. The R53 catch can kit ships complete with a laser cut stainless steel bracket that will for direct mounting to an easy to access bolt in the engine compartment.

This Product Fits:
R53 Mini Cooper S

Kit Includes:
- BSH Competition High Capacity Catch Can
- BSH Billet Dip Stick
- Laser Cut Catch Can Bracket
- Integrated O-Ring Sealed Drain
- Oil and Heat Resistant O-Rings
- Retaining Hardware
- Push Lock Hose

Zoom In

You cant always re-invent the wheel, but with the right manufacturing processes, you can make one a little bit more round.

BSH takes their catch cans seriously. Externally all cans are welded together to avoid the all too common leaking issues bolt together setups have. Internally better than the competition by incorporating mesh baffling to slow down oil vapors so they cool and condense inside the can instead of your charge piping/engine. All connections are made with push lock fittings and hose to limit the use of hose clamps that would otherwise clutter up the bay. Integrated drain fittings into the base of the catch can makes maintenance a breeze.

All of the BSH catch can systems are designed to be completely reversible and mate up with all factory pcv connections utilizing vehicle specific billet connectors. The R53 catch can kit ships complete with a laser cut stainless steel bracket that will for direct mounting to an easy to access bolt in the engine compartment

This Product Fits:
R56 Mini Cooper S

Kit Includes:
- BSH Competition High Capacity Catch Can
- BSH Billet Dip Stick
- BSH Billet PCV Adapter Fittings
- Laser Cut Catch Can Bracket
- Integrated O-Ring Sealed Drain
- Oil and Heat Resistant O-Rings
- Retaining Hardware
- Push Lock Hose

Zoom In

You cant always re-invent the wheel, but with the right manufacturing processes, you can make one a little bit more round.

BSH takes their catch cans seriously. Externally all cans are welded together to avoid the all too common leaking issues bolt together setups have. Internally better than the competition by incorporating mesh baffling to slow down oil vapors so they cool and condense inside the can instead of your charge piping/engine. All connections are made with push lock fittings and hose to limit the use of hose clamps that would otherwise clutter up the bay. Integrated drain fittings into the base of the catch can makes maintenance a breeze.

All of the BSH catch can systems are designed to be completely reversible and mate up with all factory pcv connections utilizing vehicle specific billet connectors. The R53 catch can kit ships complete with a laser cut stainless steel bracket that will for direct mounting to an easy to access bolt in the engine compartment

This Product Fits:
R56 Mini Cooper S

Kit Includes:
- BSH Competition High Capacity Catch Can
- BSH Billet Dip Stick
- BSH Billet PCV Adapter Fittings
- Laser Cut Catch Can Bracket
- Integrated O-Ring Sealed Drain
- Oil and Heat Resistant O-Rings
- Retaining Hardware
- Push Lock Hose
- 120 degree AN to Push Lock Fitting
- 90 degree AN to Push Lock Fitting
- Bracket and Moutning Hardware
- Laser Cut Retention clip and hardware

Zoom In

BSH Speedshop is proud to bring you it’s all new recirculating Competition Catch Can system for the BMW N54 engine. The BSH Competition Catch Can kit is a completely bolt on and emissions compliant hardware package. This performance and longevity enhancing system connects together using in house manufactured billet adapters that simply clip into the existing connections found on the N54 engine. Blowby gasses pass through these adapters into -10 oil and heat resistant lines and through the N54 specific BSH Competition Catch Can which has an important layer of aluminum mesh baffling to aid in the separation of oil and air. BSH simplified installation by designing a laser cut bracket and a new N54 specific catch can to fit perfectly giving a stock appearance. Installation and removal for draining is made simple by utilizing a drain plug mounted at the bottom of the can, and 2 easy to remove 4mm allen screws, allowing the can to come off and on in minutes. To check fluid level, BSH has added a billet dip stick for function without taking away from the form of the product by using an unsightly plastic viewing tube. This part is a direct addition to the factory PCV system and installs without any permanent or unsightly modifications to the vehicle.

Function:
The purpose of a catch can system is to collect/vent the blowby vapors inherent as part of the combustion process. The factory setup sucks these oily vapors directly back into the engine exposing them to everything in their path. Removal of these vapors is especially important on direct injection engines. Port injection engines have detergent enhanced fuel passing over the intake ports constantly cleaning off the intake valves. Direct Injection does not allow for this as the injectors spray right into the combustion chamber. Over time these oils harden and cake to the intake valves causing drastically reduced head flow, cold start misfires, greatly increased knock retard and of course a nice expensive bill to clean it all out. In the short term getting these vapors out of the combustion path reduces knock retard by not allowing oil vapor to mix with the air fuel mixture. In addition the free flowing lines allow the engine to rev easily giving a more responsive feel to the engine as a whole.

This Product Fits:
BMW N54 Engines

Kit Includes:
- BSH N54 Specific 3" Recirculating Catch Can
- BSH Billet Dipstick
- BSH Laser Cut Mounting Bracket
- BSH outlet PCV adapter
- BSH inlet PCV adapter
- 10 Push Lock Line 

Zoom In

By adding a BSH Competition Catch Can system to your 2.0T TSI you are protecting your stock or tuned motor from the drawbacks of allowing blowby gasses to enter your combustion chamber. As the TSI engine is both high compression and turbocharged, allowing volatile oil vapor access will reduce power across the rev range by making the engine substantially more prone to pre-ignition/detonation. Keep your timing up and a smile on your face by getting those gasses out of your engine!

This Product Fits:
2.0T MKV08.5-10 GTI, GLI, Jetta, Passat, EOS MKVI 10 - Present GTI, Jetta, Passat, Tiguan
Audi A3, S3, TT

Kit Includes:
- BSH Competition High Capacity Catch Can
- BSH Billet PCV Adapters
- BSH Billet Manifold Cap
- BSH Billet Dip Stick
- Laser Cut Catch Can Bracket
- Integrated O-Ring Sealed Drain
- Oil and Heat Resistant O-Rings
- Retaining Hardware
- Push Lock Hose

Zoom In

BSH is proud to bring you its all new Race Catch Can System for the 09+ TSI Platform. The BSH Race Catch Can System introduces a multiple -10 line system plumbed into the block and into the head to allow for complete ventilation from its respective source. This performance and longevity enhancing product connects together using high end AN fittings and in house manufactured billet adapters that simply clip into the existing connections found on the 2.0T engine. To ensure proper fitment within the factory engine bay BSH has designed a proprietary laser cut bracket for mounting and a proprietary breather filter to clear the factory hood shock. Installation and removal for draining is simplified by utilizing a T Bolt mounting system allowing the can to come off and on by simply loosening one nut. This part is a direct addition to the factory PCV system and installs without any modifications to the vehicle.

This Product Fits:
2.0T MKV08.5-10 GTI, GLI, Jetta, Passat, EOS MKVI 10 - Present GTI, Jetta, Passat, Tiguan
Audi A3, S3, TT

Kit Includes:
- BSH 3" Race Catch Can w/ Splash Guard
- BSH Breather Filter
- BSH Laser Cut Mounting Bracket
- BSH 22mm PCV adapter
- BSH 26 mm PCV adapter
- BSH Manifold Block off Cap
- AN Fittings
- 10 Push Lock Line

Zoom In

A natural byproduct of the crank case ventilation system is oil vapor making its way back into the intake. These gases are recirculated back into the intake for emissions compliance. On factory cars where performance is only one piece of the puzzle this is no problem. However when the best performance is the goal these vapors have to go! By allowing oil vapors to enter the combustion chamber you increase your chances for detonation significantly. Oil vapors will also gum up the intake valves over time.

BSH catch can systems remove these oil vapors from the intake tract and collect them or vent them. All kits are designed to work on applications ranging from bone stock cars all the way to fully built motor big turbo cars

BSH Vent to Atmoshpere catch cans utilize a large diameter breather filter to ensure all crank case gasses are expelled. Available in two options to meet your desired engine bay look.


This Product Fits:
All MKIV Transverse 1.8t Engines